0
This tool is designed to attach cardboard, insulation, fabric, foil, leather and similar materials to wood or wood-like surfaces.
It comes equipped with an LED light to indicate the status of the power tool, an LED light for increased visibility during operation, a drive shift knob to select between single and contact firing mode for more precise or rapid firing, and a depth adjustment wheel to set the firing depth of the nail/staple heads as desired. It also features a belt hook and soft grip handle.
Additionally, it comes equipped with a safety contact pin, which must be pressed against the workpiece before pulling the trigger to fire nails/staples in single-fire mode, thus working as a safety mechanism to prevent accidental starting of the tool.
Voltage: 20V, 2000mAh
Battery capacity: 2Ah/4Ah/6Ah (Li-ion) (not included)
Average firing rate: 60 nails/staples per minute
Maximum firing speed: 100 nails/staples per minute
Maximum magazine capacity: up to 100 nails/staples
Maximum nail length: 50mm (18 gauge nails)
Maximum staple length: 40mm (18 gauge narrow crown light duty staples)
Nail length: 20-50mm
Maximum nail cross-section width: 1.25 mm
Maximum nail cross-section thickness: 1.05 mm
Staple length: 19-40mm
Maximum staple crown: 6 mm
Maximum width of staple cross section: 1.2 mm
Maximum thickness of staple cross section: 1 mm
Operating time:
2 Ah battery: 420 staples/nails per charge
4Ah battery: 800 staples/nails per charge
6Ah battery: 1200 staples/nails per charge
Dimensions: 292x259x94 mm
Weight: 2.8 kg
LED LIGHT
BELT HOOK
SOFT ERGONOMIC HANDLE
DRIVE SHIFT KNOB TO SELECT FIRING MODE
DEPTH ADJUSTMENT REQUEST
LED LIGHT STATUS INDICATOR
Red LED on = battery is low
Flashing red LED = nails/staples are jammed
Green LED on = no nails in magazine, power tool is in dry firing protection
Flashing green LED = overheating, the power tool is in overheat protection
*Battery not included
